| |
|
|
|
|
| |
Mains
Water Solenoid Valves
- Double
|
|
| |
|
|
| |
|
 |
 |
|
Specification:
Part of an extensive line of normally closed, pilot
operated solenoid valves to control the mains water
supply for both fixed and free standing appliances.
Double solenoid valves give two independent outputs
for both fixed and free standing appliances. Typical
applications are: Drinks vending, catering boilers,
glass washers, showers, air conditioning units,
clothes and dishwashers. This series of Solenoid
Valves are designed to operate on mains supply systems
above 0.2 bar. The valves are fully compliant with
both water and electrical approval agencies world
wide. Available in 180º and 90º versions.
Technical
Details:
| Rated
Voltage: |
220-240
V ac, 110-120 V ac, 24 V ac & 12 V ac.
Others upon request |
| Operating
Pressure Range: |
0.2
to 10 bar |
| Flow
Regulator (Optional): |
0.25
to 17 Litres/minute |
| Approvals: |
Approved
by all Major Approvals Agencies World-wide
EN 60 730-2-8, UL 429. CSA C22.2 etc. |
| Terminals: |
Two
6.35 x 0.8 mm male tab terminals. RAST 5 and
RAST 2.5 Optional. |
D18
Series
With
BSP (gas) thread and pushfit port connections
 
|
 |
D18 Series Details:
| Inlet
Thread: |
3/4”
BSP, 3/8” BSP or 1/2” BSP and 3/8”
or 10mm push fit |
| Outlet
Thread: |
3/4”
BSP, 3/8” BSP or 1/2” BSP and 3/8”
or 10mm push fit |
|
Any
combination of the inlet to outlet thread
are available by request.
|
|
|
|
|
|
 |
|
 |
| |
|
|
|
|
