John Guest - LLDPE Tubing - 1/2" OD | 0.375" ID - 250FT COIL | Abbeychart - Buy Online
Next Day Delivery*
Call Us: +44 (0) 1367 711900
Trade Pricing Available

We're currently experiencing some technical issues on our website.
Please give us a call if you cannot find what you are looking for. We apologise for any inconvenience.

John Guest - LLDPE Tubing - 1/2" OD | 0.375" ID - 250FT COIL

Product Code: John Guest - LLDPE Tubing - 1/2" 250FT

Brief Description


  • Linear low density polyethylene

  • Suitable for cold and intermittent hot water applications

  • Broad chemical compatibility

  • FDA and NSF certified

  • Strong, flexible and robust

Images for display purposes only
Part Number Tube OD Tube ID Length Color Price Qty
PE-16-GI-0250F-B 1/2 0.375" 250ft Blue
£47.82
PE-16-GI-0250F-N 1/2 0.375" 250ft Natural
£46.03
PE-16-GI-0250F-R 1/2 0.375" 250ft Red
£47.82
PE-16-GI-0250F-E 1/2 0.375" 250ft Black
£47.82
PE-16-GI-0250F-W 1/2 0.375" 250ft White
£47.82

Please Call

John Guest - LLDPE Tubing

1/2" OD | 0.375" ID - 250FT Coils

The John Guest PE Range of plastic tubing is produced in Linear Low Density Polyethylene for cold and intermittent hot water applications.

Our tubing provides the benefits of a wide range of temperature and pressure suitability, broad chemical compatibility and is made from non contaminating materials. Common applications being water purification, water conditioners, ice makers and misting systems. LLDPE is more robust than traditional low or medium density polyethylene and is recommended for use with cold and intermittent hot water.

Our tubing is made from FDA approved materials and is NSF International certified.

John Guest Polyethylene tubing is designed for use with John Guest Super Speedfit,Push-fit fittings, John Guest Shut-Off Valves and virtually all standard tubing connectors

N denotes natural colour. To request other colours please refer to the table below. Popular items are now generally in stock and are available in minimum quantities of 2 coils. Other items may be subject to longer lead times and are available in minimum quantities of 50 coils.

Standard Colours Available:
  • N=Natural
  • B=Blue
  • E=Black
  • R=Red
  • W=White

Accreditations

Accepted by almost all the world’s beer and beverage producers and by the manufacturers of drinks dispense equipment, John Guest products have quality and performance approvals from leading testing and acceptance authorities.

Technical Specification

Working Pressure and Temperature Range

Super Speedfit fittings are suitable for the following pressures and temperatures.

Also suitable for vacuum
Depending on the tube used, under certain conditions fittings may be used at higher pressures and temperatures. Please refer to our Customer Services Department for guidance. Note 1 Bar = 14.5 PSIG.

Tube Types

Plastic Tube– Polyethylene, nylon and polyurethane conforming to the tolerances shown below. For soft tubing or thin wall tube we recommend the use of tube inserts.

Braided Tube – Use of Tube to Hose Stems is essential when using tube. Use of clamps to retain braided tube on barbs is recommended

Metal Tube (soft) – Brass, copper or mild steel conforming to the tolerances below.

Metal Tube (hard) – We do not recommend Super Speedfit fittings for hard metal or chromium plated tubes.

For stainless steel and other polished metal tubes we recommend the use of Superseal fittings. It is essential that outside diameters be free from score marks and that the tube be deburred before inserting the fitting.

Tube Tolerances

Super Speedfit fittings are offered for tubes with outside diameters to the following tolerances.

Installation and System Testing

Fittings and tube should be kept clean and undamaged before use. All tube and fittings installations must be pressure tested after installation to ensure system integrity before handing over to the final user.

1/4 Turn Valves

These valves have been designed to allow temporary servicing of downstream equipment and must only be used in the fully open or fully closed position. DO NOT USE THESE VALVES: In a partially open position to control flow; to provide a permanent termination; without tubing assembled or plugged (or threaded connections sealed, or as a tap or “faucet”.

Chemicals

For use with chemicals or other potentially aggressive liquids, please refer to our Customer Services Department. In general, use only water or oil based paint. DO NOT ALLOW CONTACT WITH Cellulose based paint, paint thinners or strippers, solder flux or aggressive cleaners (see Cleaners and Sanitising). Keep away from ozone generators such as electric motors, mercury vapour lamps and high voltage electrical equipment. Super Speedfit fittings are not recommended for use with explosive gases, petroleum spirits, and other fuels or for central heating systems.

Collet Covers

Are available as additional security against removal of the tube or to provide a simple means of colour coding. The cover is offered in a range of six colours.

Food Quality

NSF standard 51 listed fittings in this brochure are produced in Food and Drug Administration (FDA) compliant materials and are therefore recommended for food quality applications. The majority of fitting in this catalogue are also supported by a John Guest declaration of compliance to European Regulation (EC) no.1935/2004

Maximum Torque Values for Plastic Threads BSP, BSPT & NPT.

Plastic threads are not generally as strong as brass threads. Customers and end users should be aware of this when choosing products for their applications. Overtightening of plastic threads will cause undue stress and eventual cracking and leakage. The maximum torque figures for BSP and BSPT threads used on John Guest fittings in mating threads conforming to the relevant BS or International thread standards are shown below.

John Guest recommend OEM customers to consider replacing threaded ports with the more modern Cartridge Systems. It is recommended that all installations are checked prior to use to determine that a seal has been made.

Maintenance and Replacement Intervals

John Guest products generally require little maintenance but as a minimum we recommend routine visual inspection. Frequency of visual inspection will depend on severity of application and risk of failure. If after visual inspection John Guest products appear damaged, cracked, charred, discoloured, heat distorted or corroded they should be replaced. Any product that is or appears to be leaking should be replaced. Product life is affected by the severity of the application, the hostility of the working environment and contact with aggressive chemicals or liquids. It is therefore important that specific replacement intervals be considered by specifiers/users/customers based on previous service life or when failure could result in unacceptable downtime, damage or injury risk.

Cleaners and Sanitising of Fittings

The external surfaces of John Guest products must not come into contact with oxidising or acidic cleaners and sanitising agents, for example (but not limited to) those below pH 4, high in sodium hypochlorite level (bleach) or containing hydrogen peroxide. Our plastic material suppliers recommend ECOLAB Oasis 133 as a suitable cleaner for the external surfaces of products manufactured by John Guest. Several different methods exist for sanitising the internal surfaces of fluid systems, including sodium hypochlorite, hydrogen peroxide, chlorine dioxide or ozone. It is entirely the responsibility of the end user to determine if the chosen method is suitable for use with John Guest products over the planned working life of the system. However, to avoid unnecessary early failure, John Guest requires that the disinfection solution must be immediately flushed out at all draw off points with fresh, wholesome water at the end of the disinfection period. The solution must not be left in the system. Disinfection solutions must only come into contact with the internal (fluid carrying) surfaces of the system. If any other surfaces of a fitting come into contact with disinfection solution the whole fitting must be replaced immediately. Polypropylene fittings offer greater resistance to aggressive chemicals than Acetal fittings but do not have the same mechanical properties. John Guest polypropylene fittings are generally designated by the part number prefix PP or PPM.

Side Loads

John Guest products are not designed to be used whilst under side load as this may adversely affect their ability to function long-term. Always ensure tubes have good alignment with the fitting. They must also not be subjected to any form of impact or other damage, such as being hit or dropped, even accidently. If fittings have damaged or suffered an impact, they should be replaced immediately. John Guest warranty does not cover loss caused by any form of damage.

Delivery Policy

For website items, delivery is £8.95 for all items.

Abbeychart offers a next day delivery service for orders placed before 3.30pm. The delivery service is standard to all central UK. If you require overseas or timed delivery, please call the sales office

Special Carriage Costs

When ordering online and chosing a "Special Carriage Charge" the times given are subject to a 30minute window and work off a next working day basis. Please make sure that if a timed carriage option is selected that someone is available to sign for the consignment as without this it will be subject to being returned to the delivery depot for a redelivery 1-2 days later.

N.B - Deliveries requested for Pre 9.30am are subject to being delivered as early at 7am.

N.B - All orders processed after 3.30pm, weekends or Bank Holidays are subjected to being processed the following working day

Policy

An RMA request must be completed online at http://abbeychart.returnsportal.net/

If approved, an automated RMA email will be sent. This will reference a unique RMA number. The automated RMA approval email will prompt you to log into the online returns system and print off the RMA packing slip, which is to be affixed to the outside of the packaging.

N.B. Returns will not be accepted without a returns authorisation number (RMA) and will be returned at the sender’s expense.

When you have your returns authorisation number (RMA), please ensure you send the return to our Logistics Centre:

Hawco Limited t/a Abbeychart,
Units 5 & 6 Woodside Road
South Marston Park,
Swindon
Wiltshire
SN3 4WA>

Credit or replacement product will only be issued on receipt and Abbeychart's acceptance of faulty or damaged items. Items that are returned which are subsequently determined to have been damaged by the customer and or by their agent may be subject to an investigation and admin fee. In all instances any logistical costs incurred by Abbeychart during this process will be chargeable.

Item(s) must be returned within 7 days of the issue of the returns number. If not returned by this date then no credit will be given.

Items ordered incorrectly or that are surplus to requirements may be subject to a 20% restocking charge and will only be accepted within the first 3 months of sale and are still in the original packaging. Items ordered in specifically may be refused entirely.

N.B. No credit will be issued to any surplus items that are received damaged.

The customer has a 3 day window to report items that have been received damaged, failure to do so will result in your returns claim being rejected.