You may have seen our recent posts showcasing the E4 Borg & Overström watercooler, but what often goes unnoticed is the quality of the installation behind it.
At Abbeychart we specialise in professional watercooler and drinks dispense installation, ensuring every system is safe, compliant, and built to perform long term. For this installation, our expert team used a bespoke installation rail, assembled in-house using WRAS-approved components from our extensive stock range.
Why a Bespoke Installation Rail Matters
Correct installation is critical to the performance and safety of any commercial watercooler. Water pressure that’s too high, poor backflow protection, or undetected leaks can lead to equipment failure, water damage, or contamination risks.
Our bespoke installation rails are designed to:
Protect the mains water supply
Ensure compliance with water regulations
Control incoming water pressure
Prevent flooding and leaks
Make maintenance and servicing easier
This approach gives customers confidence that their drinks dispense system is installed correctly from day one.
Components Used in This Watercooler Installation
Thanks to our extensive product range and strong stock holding, we were able to build the ideal installation rail using the following high-quality components:
Double Check & Shut Off Valve (BAR425A10N002)
A vital backflow prevention valve designed to protect the water supply from contamination. It features two independently acting, spring-loaded check valves for added safety and compliance.
WRAS Approved Pressure Reducing Valve (RP800.044)
A brass pressure reducing valve that ensures incoming water pressure does not exceed 2.8 bar, protecting the watercooler and extending the life of internal components.
Eltek Flood Prevention Device (HE100041.06)
This flood prevention device automatically shuts off the water supply if excessive water flow is detected, with adjustable settings between 5 and 50 litres to suit different applications.
Eltek Waterblock External Reset (HE45002)
A simple mechanical solution that allows the Eltek Waterblock to be reset without disconnecting or dismantling the water hose—saving time and reducing disruption.
John Guest Tap Adaptor (CI320816FS)
A reliable adaptor used to connect pipework or tubing to a BSP threaded connection, ensuring a secure and professional finish.
Drinks Dispense Installation Built Around Your Needs
Every site is different, which is why we don’t take a one-size-fits-all approach. Whether you need:
a bespoke drinks dispense installation kit, or
a pre-assembled installation rail ready to install,
our expert team will help you find the best solution for your application.
Need Expert Help With Watercooler Installation?
If you’re planning a commercial watercooler or drinks dispense installation, our knowledge, product range, and installation expertise ensure the job is done right first time.
Contact our team today to discuss bespoke installation rails, component kits, or complete installation solutions.
You may have seen our recent posts showcasing the E4 Borg & Overström watercooler, but what often goes unnoticed is the quality of the installation behind it.
At Abbeychart we specialise in professional watercooler and drinks dispense installation, ensuring every system is safe, compliant, and built to perform long term. For this installation, our expert team used a bespoke installation rail, assembled in-house using WRAS-approved components from our extensive stock range.
Why a Bespoke Installation Rail Matters
Correct installation is critical to the performance and safety of any commercial watercooler. Water pressure that’s too high, poor backflow protection, or undetected leaks can lead to equipment failure, water damage, or contamination risks.
Our bespoke installation rails are designed to:
Protect the mains water supply
Ensure compliance with water regulations
Control incoming water pressure
Prevent flooding and leaks
Make maintenance and servicing easier
This approach gives customers confidence that their drinks dispense system is installed correctly from day one.
Components Used in This Watercooler Installation
Thanks to our extensive product range and strong stock holding, we were able to build the ideal installation rail using the following high-quality components:
Double Check & Shut Off Valve (BAR425A10N002)
A vital backflow prevention valve designed to protect the water supply from contamination. It features two independently acting, spring-loaded check valves for added safety and compliance.
WRAS Approved Pressure Reducing Valve (RP800.044)
A brass pressure reducing valve that ensures incoming water pressure does not exceed 2.8 bar, protecting the watercooler and extending the life of internal components.
Eltek Flood Prevention Device (HE100041.06)
This flood prevention device automatically shuts off the water supply if excessive water flow is detected, with adjustable settings between 5 and 50 litres to suit different applications.
Eltek Waterblock External Reset (HE45002)
A simple mechanical solution that allows the Eltek Waterblock to be reset without disconnecting or dismantling the water hose—saving time and reducing disruption.
John Guest Tap Adaptor (CI320816FS)
A reliable adaptor used to connect pipework or tubing to a BSP threaded connection, ensuring a secure and professional finish.
Drinks Dispense Installation Built Around Your Needs
Every site is different, which is why we don’t take a one-size-fits-all approach. Whether you need:
a bespoke drinks dispense installation kit, or
a pre-assembled installation rail ready to install,
our expert team will help you find the best solution for your application.
Need Expert Help With Watercooler Installation?
If you’re planning a commercial watercooler or drinks dispense installation, our knowledge, product range, and installation expertise ensure the job is done right first time.
Contact our team today to discuss bespoke installation rails, component kits, or complete installation solutions.